InfraRecorder version 0.50.0.0 (x86)
Started: mercredi, février 17 2010 11:56:43.
Versions: MSW = 5.1, IE = 6.0, CC = 6.0.
FileSystemWriter::Create
  Sector offset: 0.
  Allocated directory entries 3085 sectors.
CCore::BurnTracks
  [1,0,0] TSSTcorp CDDVDW TS-L633B SC01
  File = D:\DOCUME~1\LM\LOCALS~1\Temp\Inf9.tmp.
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Method = 0, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Mode = 0.
  Command line to run: "D:\Framakey\Apps\PortableInfraRecorder\InfraRecorder\cdrtools\cdrecord.exe" -v dev=1,0,0 gracetime=5 -sao driveropts=burnfree -pad -data "/cygdrive/D/DOCUME~1/LM/LOCALS~1/Temp/Inf9.tmp"
   > scsidev: '1,0,0'
   > scsibus: 1 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/d/Framakey/Apps/PortableInfraRecorder/InfraRecorder/cdrtools/cdrecord: Warning: The DMA speed test has been skipped.
   > Cdrecord-ProDVD-ProBD-Clone 2.01.01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0.9'.
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'TSSTcorp'
   > Identifikation : 'CDDVDW TS-L633B '
   > Revision       : 'SC01'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
   > Current: DVD+R
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD+R/DL 
   > Profile: DVD+R (current)
   > Profile: DVD+RW 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RAM 
   > Profile: DVD-R sequential recording 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Profile: Removable Disk 
   > Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
   > Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 1409024 = 1376 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data  2072 MB         padsize:   30 KB
   > Total size:     2072 MB = 1060991 sectors
   > Current Secsize: 2048
   > Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1234113
   > Reducing transfer size from 64512 to 32768 bytes.
   > Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session.
   > Last chance to quit, starting real write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > Starting new track at sector: 0
   > 2x
   > Track 01: writing  30 KB of pad data
   > Track 01: Total bytes read/written: 2172878848/2172909568 (1060991 sectors)
   > Writing  time:  379
   > 391s
   > Average write speed   4
   > 1x
   > Min drive buffer fill was 98
   > Fixating
   > Fixating time:   28
   > 086s
   > /cygdrive/d/Framakey/Apps/PortableInfraRecorder/InfraRecorder/cdrtools/cdrecord: fifo had 66311 puts and 66311 gets
   > /cygdrive/d/Framakey/Apps/PortableInfraRecorder/InfraRecorder/cdrtools/cdrecord: fifo was 0 times empty and 15153 times full, min fill was 79
   > BURN-Free was 54 times used
CCore::ProcessEnded
  Process exited with code: 0.
  Error: Could not start or stop the unit.
  CDB:	0x1B,0x00,0x00,0x00,0x03,0x00
  Sense:	0x70,0x00,0x05,0x00,0x00,0x00,0x00,0x0A
  	0x00,0x00,0x00,0x00,0x24,0x00,0x00,0x00
  	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
FileSystemWriter::Create
  Sector offset: 0.
  Allocated directory entries 3085 sectors.
CCore::BurnTracks
  [1,0,0] TSSTcorp CDDVDW TS-L633B SC01
  File = D:\DOCUME~1\LM\LOCALS~1\Temp\InfB.tmp.
  Eject = 0, Simulate = 0, BUP = 1, Pad tracks = 1, Close = 1, Method = 0, Overburn = 0, Swab = 0, Ignore size = 0, Immed = 0, Audio master = 1, Forcespeed = 0, VariRec (enabled) = 0, VariRec (value) = 0, Mode = 0.
  Command line to run: "D:\Framakey\Apps\PortableInfraRecorder\InfraRecorder\cdrtools\cdrecord.exe" -v dev=1,0,0 gracetime=5 -sao driveropts=burnfree -pad -data "/cygdrive/D/DOCUME~1/LM/LOCALS~1/Temp/InfB.tmp"
   > scsidev: '1,0,0'
   > scsibus: 1 target: 0 lun: 0
   > SCSI buffer size: 64512
   > /cygdrive/d/Framakey/Apps/PortableInfraRecorder/InfraRecorder/cdrtools/cdrecord: Warning: The DMA speed test has been skipped
   > Cdrecord-ProDVD-ProBD-Clone 2
   > 01
   > 01a61 (i686-pc-cygwin) Copyright (C) 1995-2009 Jörg Schilling
   > TOC Type: 1 = CD-ROM
   > Using libscg version 'schily-0
   > 9'
   > Driveropts: 'burnfree'
   > atapi: -1
   > Device type    : Removable CD-ROM
   > Version        : 0
   > Response Format: 2
   > Capabilities   : 
   > Vendor_info    : 'TSSTcorp'
   > Identifikation : 'CDDVDW TS-L633B '
   > Revision       : 'SC01'
   > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM
   > Current: DVD+R
   > Profile: DVD-R/DL sequential recording 
   > Profile: DVD-R/DL layer jump recording 
   > Profile: DVD+R/DL 
   > Profile: DVD+R (current)
   > Profile: DVD+RW 
   > Profile: DVD-RW sequential recording 
   > Profile: DVD-RW restricted overwrite 
   > Profile: DVD-RAM 
   > Profile: DVD-R sequential recording 
   > Profile: DVD-ROM 
   > Profile: CD-RW 
   > Profile: CD-R 
   > Profile: CD-ROM 
   > Profile: Removable Disk 
   > Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr)
   > Driver flags   : NO-CD DVD MMC-3 SWABAUDIO BURNFREE 
   > Supported modes: PACKET SAO LAYER_JUMP
   > Drive buf size : 1409024 = 1376 KB
   > FIFO size      : 4194304 = 4096 KB
   > Track 01: data  2072 MB         padsize:   30 KB
   > Total size:     2072 MB = 1060991 sectors
   > Current Secsize: 2048
   > Trying to clear drive status
   > Blocks total: 1060992 Blocks current: 1060992 Blocks remaining: 1
   > Reducing transfer size from 64512 to 32768 bytes
   > Starting to write CD/DVD/BD at speed 8 in real SAO mode for single session
   > Last chance to quit, starting real write in 5 seconds
   >  Operation starts.
   > Waiting for reader process to fill input buffer ... input buffer ready.
   > Starting new track at sector: 0
CCore::ProcessEnded
  Process exited with code: 254.